Plastic Products Made in the USA Directory

Injection Molding Companies in America

Peliton Plastics is a custom plastic injection molding company, located in Valdosta Georgia. Our
services include economical plastic injection molding, contract manufacturing, assembly, flatbed
screen printing, mold repair, mold texturing and machining. Our staff is always happy to assist and
advise inventors with their inventions. Our low cost custom plastic injection molding services can
mold plastic products from a variety of thermoplastics and engineered resins - polypropylene,
polyethylene, polystyrene, polycarbonate, ABS, acrylic, vinyl, nylon, acetyl, polyphenylene oxide, or
others depending on customer requirements, then we ship directly to our customer. Our plastic
injection molding facility is located in Valdosta Ga.

Rex Plastics, Inc. is proud to support the US injection molding and the US manufacturing industries
by keeping work domestic, and not going overseas for molds or production. Our products are
guaranteed and made in the USA, using domestically manufactured plastics whenever possible.      We
are a contract manufacturer of custom injection molded plastic parts who will work with anyone from
the individual inventor to international corporations. Industries served include electronics,
communications, military & consumer products. Capabilities include in-house mold building,
prototyping, molding, assembly, packaging, pad printing, drilling, tapping, & hot stamping. Up to
42oz. shot size.

The Lakone Company. Since 1944 we have manufactured the highest quality injection molded
components. We are a financially strong company, which allows us to be very competitive. The
Lakone Company is built on old fashion values - honesty, integrity and dedication to our customers.
We are an ISO 9001:2000 family owned business with a dedicated team of coworkers that produce
superior products through our continual improvement approach. We involve all levels of employees to
this philosophy and keep one goal in mind – to exceed our customers' expectations.

DisplayStands4You, your source for school typing book holders, acrylic countertop book stands,
display stands, and keyboarding textbook stands

First American Plastic Molding Enterprise was established in 1993 as a joint venture between the
Mississippi Band of the Choctaw Indians (51 percent owners) and Quad Inc. (49 percent owners).
This qualifies First American as a Certified Minority Business Enterprise. We have the level of
expertise that you expect from a superior quality vendor. Our total workforce of approximately 150
includes 14 cross-functional management team members with more than 300 years of combined
molding experience. First American operates two facilities in the United States . Our enterprise
headquarters is in South Beloit , Illinois , a 39,000-sq.-ft. facility that is located 75 miles northwest of
Chicago at the Wisconsin border. Our Ocean Springs, Mississippi , facility covers 22,000 sq. ft. and
is near Biloxi on the Mississippi Gulf coast. Because of these centrally located facilities — one in the
north and one in the South — First American’s footprint is ideal from a logistics and freight stand
point, allowing us to capture economies of scale and pricing advantages — as well as be closer to
your plants and end-users.

Pioneer Plastics Plastic Injection Molding - Display Cases - Containers & More From Concept to
Reality With over 35 years of experience in the plastics injection molding industry, Pioneer provides
full-service custom molding for your plastic parts. Whether you are interested in new product
development or finding a high quality, reliable molder for your existing parts, Pioneer is dedicated to
taking your idea from concept to reality. To streamline our process and to give you the best possible
service, we’ve developed a team concept that allows us to focus in on 5 key areas that best suit your
needs.

Plastic Components, Inc. provides low cost, tight-tolerance, precisely engineered products closer to
home here in the United States . PCI includes a fully automated production facility which eliminates
human involvement in the molding process. Our plastic manufacturing capabilities allow our
customers to do business in the US instead of going offshore. Our 40,500 square foot plant in
Germantown, WI operates using Toyo and Nissei molding presses with top of the line analytical
software (IQMS), expert engineering support (Moldflow) and operational excellence (RJG
technology). PCI is ISO 9001-2008 & ISO 13485 certified.

Jefferson Rubber  Jefferson Rubber Works was incorporated in June, 1975, to provide a source of
high precision, cost efficient rubber molded parts for large volume rubber consumers. Using the
injection molding process, our state-of-the-art technology enables us to produce at rates far greater
than conventional molding equipment. We produce our rubber parts in a modern facility at the
Worcester Airport Industrial Park.

Plastic Tubing Made in the USA

Excalibur Extrusions 40 years specializing in plastic tubing Made in the USA since 1970, Excalibur has
been manufacturing a variety of applications, including plastic pipe and “Machined” nipples for the turf
& irrigation industries, vacuum tube for use in central vacuum systems & plastic cores for film,
medical, brush and others. Over the years, we continue to improve all our processes for quality
control and reach new heights with providing exceptional customer care. Excalibur believes that just in
time delivery is key to the success of our customers and this is why we maintain a core inventory for
fast delivery.

Plastic Thermoforming Made in America

Spencer Industries Inc. – We are Proud to support the USA with locations in Dale , Indiana and
Hampton South Carolina specializing in Heavy Gauge Plastic Thermoforming.  We can produce
anything from the simplest Vacuum Formed part, to high esthetic detailed Pressure Formed parts
including award winning Twin Sheet Thermoformed product.  Spencer Industries is a unique custom
thermoformer because we can be a complete supplier to our customers. Our in-house extrusion and
assembly capabilities allow us to streamline the process, thus reducing leadtimes, and eliminating non-
value added activities for the customer.   Spencer Industries was founded in 1981 is locally owned
and operated.

Universal Plastics  Since Universal Plastics was founded in 1965, our company has been a leader in
the thermoforming industry. Our plant, located in Massachusetts, has over 95,000 square feet, and we
have over 80 employees. As Universal Plastics has grown, we have refined and further developed the
thermoforming process to allow the manufacture of large and complex products that could never have
been conceived in the previous generation. Today’s thermoformed products can match the quality and
finish of injection molding, in high performance plastics, and in sizes that dwarf the capabilities of
most molders.

Mayfield Plastics  Mayfield Plastics has played a prominent manufacturing role in Central
Massachusetts for almost a half-century. In 1970 the former parent company of Mayfield Plastics, S.
Ralph Cross and Sons, decided to transform its pattern making business. Founded in 1917 by S. Ralph
Cross, his sons, Stanley and Gordon Cross, made a strategic decision to capitalize on their core
competency, mold making, by coupling it with the manufacturing of custom made plastic parts using
the emerging plastic forming process of Thermoforming.
American Made Plastic Products Directory. What isn't made of plastic these days? On this page we have a large directory of companies that are skilled at making
plastic parts and products in the USA. This is a very competitive market where American employers have to compete with overseas factories that can pay their employess 1/10th or maybe
even less than our employees here receive not to mention health benefits, vacation pay, and possibly more.
American Made Plastic Items Injection Molding
Please Check the Label before you
order. The Google Ads on this site
are not confirmed to be Made in the
USA. The listing in the middle are.
Follow jobs4americans on Twitter
Join Our Email List For New American Made Products Listings
Email:  
For Email Marketing you can trust
Please Check the Label before you
order. The Google Ads on this site
are not confirmed to be Made in the
USA. The listing in the middle are.